Pete's YFZ thread

[Heather]

oh by the way, this pipe is going to be loud as hell....So i made one small mod on the end cap. I put a regular Comp End on it so you can throw in the inserts....BUT I dont recommend using the smallest one, ever. It will blow up, theres just too much pressure that will build and it will make the can explode. if you HAVE to use the stage 2 you can, but again, I dont recommend it for long term. I did throw in extra wool and packing to try to help insulate the sound in the can, but YFZ's are relatively loud to begin with so I dont want you crying when you start it up :)

[Pete]

Large Diameter head pipe ("Prowler"), Large inlet, "Big Bird" Core (2.5" vs normal 2.125"), Competition Can/End cap and some special mods......Ready to go.

Now Peter.....if this isnt up to....*cough*...your standards, I give up. This is all I can do as far as fabricating a pipe for top end. Its just not what HMF does, were more woods racing. Ive pulled out all the stops for this pipe....so I hope that it works for you, but if not, have fun with that DASA 

now Heather, have some faith in the fabrication skillios.  I'm guessing this pipe will do the trick nicely.

[Heather]

Oh believe me, I have full faith in my pipes, but you pick apart everything, so im just warning you hah.

There might also be an issue with the rear shock.....well chat about that once it arrives

[Pete]

Oh believe me, I have full faith in my pipes, but you pick apart everything, so im just warning you hah.

There might also be an issue with the rear shock.....well chat about that once it arrives

so sue me for being detail oriented ;)

[Heather]

yet you were fine with the awfulness of that DASA and its burn thru YUCK! 
I have a feeling you will like this pipe

[Pete]

yet you were fine with the awfulness of that DASA and its burn thru YUCK! 
I have a feeling you will like this pipe

go read my comments on the DASA again.  I liked the performance, but the welds were poop.

[Pete]

thanks for humoring me Heather, the new pipe looks like a freaking beast compared to the old 

[Pete]

pics of the standard oval Comp series vs. the custom Prowler header with Big Bird core.

[Heather]

remembered what we talked about.... loud and rear shock might need tweeking.

[CBerg]

Tweaking meaning remove and install a Blaster rear shock.